BRUCHA Panel FP-F

BRUCHA Fire-Rated Facade Panels -
Concealed fixation panels with non-combustible mineral wool core insulation for optimal fire resistance and protection.

manufacturing tolerance

nach EN 14509

sound insulation

ca. 32 dB (frequenzabhängig)

temperature stability

90° C / 194° F

thickness

2.36 in - 9.45 in

manufactured lengths

max. 17 yd (over 15 yd oversized transport)

fire behavior

nach EN 13501-1, Euroklasse A2s1d0, nicht brennbar

construction width

43.31 in

special width

39.37 in

Standard FP-P Panel Composition & Attributes 

Coil-coated galvanized steel faced panels with mineral wool core insulation 

Exterior

  • Standard 25μm polyester surface coating. (Optional higher UV and chemical resistant coatings available upon request.)  Panels are shipped with a strippable PVC protective film. The film must be removed no later than 10 weeks after the production date shown on the longitudinal panel seam.
  • Profile options 1 - 6 available
  • Metal gauge: 0.0236" (0.6mm) - approx. 9% thicker than 26 gauge.  (Alternative metal gauges available on request)

Interior

  • Standard 25μm polyester surface coating.  Panels are shipped with a strippable PVC protective film. The film must be removed no later than 10 weeks after the production date shown on the longitudinal panel seam.
  • Standard Profile 1 (Profiles 2 and 3 available on request)
  • Metal gauge: 0.0236" (0.6 mm) - approx. 9% thicker than 26 gauge.  (Alternative metal gauges available on request)

Insulation core

  • Structural, web-oriented mineral fiber wool
  • Shear resistant bond to sheet steel faces 
  • Density:  approx. 7.5 lb/ft³  (Optional 8.7 lb/ft³ available on request) 

Panel connection

  • Double tongue and groove system with special connecting profile that allows concealed fixation -- mounting clips and screws are hidden and fully covered by the next panel.
  • Longitudinal mineral wool surfaces are protected by a plastic barrier film to avoid moisture penetration.

Vapor diffusion

  • Determined by climatic conditions inside building. Panels must be installed vapor tight -- technical installation tips are provided in the installation guidelines.

Testing & Certifications

  • Compliant with a wide range of US and International codes and standards.  Contact your Brucha rep for an updated list of applicable documentation. 

Downloads

Jeff Sherry
Vice President of Sales

Your personal assistant for US

Jeff Sherry
Vice President of Sales

infousa(at)brucha.com
(866) BRUCHA1